Chapter 3
Configuring Settings
Click Apply.
Step 6
To exit the Proxy Server window, click Close.
Step 7
In the System Settings window, click Reboot.
Step 8
Figure 3-29
Autoconfiguration URL Option
Follow these steps to enable a proxy server using an autoconfiguration URL:
Press Ctrl-Alt-S to display the System Settings window.
Step 1
If the IEC is managed by an IEM, enter its maintenance code.
Step 2
Click the Proxy Server icon.
Step 3
Reboot Icon in the System Settings Window
Cisco Interactive Experience Client 4600 Series User Guide
Proxy Server Settings
3-25