Cisco Interactive Experience Client 4600 Series User Manual page 241

Appendix F Video Conferencing Using the Session Initiation Protocol Client
Figure F-48
Next you will add the username, password, domain, and transport protocol for the Cisco Unified
Communications Manager (CUCM).
In the Application data editor, click +.
Step 11
Enter sip.username in the key field.
Step 12
In the value field, enter the username that the IEM will use to log into the CUCM. This is the unique
Step 13
User ID that was entered in the CUCM.
Note
In the Application data editor, click +.
Step 14
Enter sip.password in the key field.
Step 15
In the value field, enter the password that the IEM will use to log into the CUCM.
Step 16
In the Application data editor, click +.
Step 17
Step 18 Enter sip.domain in the key field.
Step 19 In the value field, enter the IP address of the CUCM.
Step 20 In the Application data editor, click +.
Enter sip.transport in the key field.
Step 21
Enter udp in the value field.
Step 22
Directory Number in the Application Data Editor
It is imperative that the value entered in the User ID field is a number. The SIP device will not
work if you enter alphabetic characters, punctuation, or spaces.
Cisco Interactive Experience Client 4600 Series User Guide
Configuring Call Manager Information
F-43