Cisco Interactive Experience Client 4600 Series User Manual page 34

Connecting to the Network
Figure 2-11
To use a static IP address:
Uncheck the Use DHCP check box.
a.
Enter the IP address in the IP Address field.
b.
c. Enter the subnet mask in the Subnet Mask field.
d. Enter the gateway address in the Gateway field.
e. Enter the primary DNS server's IP address in the Primary DNS server IP Address field.
If there is a second DNS server, enter the secondary DNS server's IP address in the Secondary DNS
f.
server IP Address field.
Cisco Interactive Experience Client 4600 Series User Guide
2-22
Using DHCP
Chapter 2 Setting Up the IEC