Cisco Interactive Experience Client 4600 Series User Manual page 222

Cisco IP Phone Set Up on the CUCM
Figure F-18
Choose the Administrator Settings icon, which is button #4 on the Applications screen.
Step 34
Figure F-19
Choose the Network Setup icon, which is button #1 on the Administrator Settings screen.
Step 35
Choose the Ethernet Setup icon, which is button #1 on the Network Setup screen.
Step 36
Choose the IPv4 Setup icon, which is button #1 on the Ethernet Setup screen.
Step 37
Step 38 Choose the Alternative TFTP icon, which is button #8 on the IPv4 Setup screen.
Step 39 In the TFTP Server 1 field, enter the IP Address of the CUCM Server.
Cisco Interactive Experience Client 4600 Series User Guide
F-24
Appendix F
System Settings Button on the Cisco Unified IP Phone 9951
Cisco Unified IP Phone 9951 Applications Screen
Video Conferencing Using the Session Initiation Protocol Client