Cisco Interactive Experience Client 4600 Series User Manual page 56

Using a VNC Viewer
Figure 2-42
Click Connect.
Step 16
When prompted for a password, enter the IEC's Maintenance Code.
Step 17
Note
The screen will then show the application that is currently running on the IEC.
Cisco Interactive Experience Client 4600 Series User Guide
2-44
VNC Viewer
When entering the Maintenance Code as the password, enter the letters of the Maintenance Code
as upper case. If for example the Maintenance Code is 6A54F3, enter "6A54F3". The password
will not work if you enter "6a54f3".
Chapter 2 Setting Up the IEC