Using Emergency Configuration Mode - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 2 Setting Up the IEC
Figure 2-34
Click the Calibrator button.
Step 2
The calibration utility will start. When it is finished, the startup URL content is displayed on the
touchscreen.

Using Emergency Configuration Mode

Note Using the emergency configuration mode should be your last resort. This is primarily done if you do not
have Internet access and you have tried to solve the issue to no avail. Consult the Cisco Interactive
Services Solution Troubleshooting Guide first.
If the system hangs during the initialization process, enter the Emergency Configuration Mode to modify
the configuration.
To use Emergency Configuration Mode, do the following:
Step 1 Log into the IEM.
Step 2 Click Devices in the left pane.
System Settings Menu
Cisco Interactive Experience Client 4600 Series User Guide
Using Emergency Configuration Mode
2-39