System Settings; Setting Management Mode - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 3 Configuring Settings
Enter the URL of the PAC file or web server in the URL field.
Step 5
Click Apply.
Step 6
To exit the Proxy Server window, click Close.
Step 7
In the System Settings window, click Reboot.
Step 8
Figure 3-32

System Settings

There are three tabs in the System settings window: Server, Device, and LAN. To configure the system,
you will need the Cisco IEM URL. If you do not know the URL, contact the administrator in your
company who installed and configured the Cisco IEM.

Setting Management Mode

In managed mode, the IEC 4600 Series is configured and controlled remotely. Managed mode facilitates
consistency and is the recommended (and default) mode.
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the System icon.
Step 2
Reboot Icon in the System Settings Window
Cisco Interactive Experience Client 4600 Series User Guide
System Settings
3-27