Cisco Interactive Experience Client 4600 Series User Manual page 147

Chapter 7 Locally Configuring the IEC
Note
Follow these steps to configure the Kiosk settings to display a web page:
Press Ctrl-Alt-S to display the System Settings window
Step 1
Click the Kiosk icon.
Step 2
Figure 7-29
Enter the website address in the URL field.
Step 3
If the navigational panel should be displayed on the kiosk display, check the Navigational panel check
Step 4
box.
Figure 7-30
Click Apply.
Step 5
To exit the Kiosk window, click Close.
Step 6
In the System Settings window, click Reboot.
Step 7
Remote Expert implementations should not use this feature.
Kiosk Icon in System Settings Window
URL Field
Cisco Interactive Experience Client 4600 Series User Guide
Kiosk Settings
7-21