Cisco Interactive Experience Client 4600 Series User Manual page 197

Appendix E Infrared Remote Controls
3.
4.
Create a New Group
If the devices that will use the customized programming are not already in a group, create a new group
by following these steps:
Click Devices in the left pane.
Step 1
In the Edit menu, click New Group.
Step 2
In the Create New Group dialog box, enter a group name in the Group Name field such as
Step 3
"IRConfig_IECs".
Click Create.
Step 4
A folder labeled with the group's name appears in the left and center panes.
Add Devices to the New Group
Add all the devices that will use the customized programming to this new group:
Step 1 Click Devices in the left pane.
In the center pane, double-click the new group's icon.
Step 2
In the Edit menu, click Properties.
Step 3
Click the Member Of tab in the center pane to view a list of devices in the group.
Step 4
Click +.
Step 5
In the Add to Group dialog box, check the devices' check boxes.
Step 6
Scroll to the bottom of the Add to Group dialog box and click Add.
Step 7
Click Apply.
Step 8
In the Predefined actions menu, click Reboot.
Step 9
Click OK.
Step 10
Create an IRConfig Policy
You will need a remote configuration file for this task. Contact the manufacturer of your remote control
to obtain it.
Follow these steps to create a policy for the IR configuration:
Click Policies in the left pane.
Step 1
In the Edit menu, click New Policy.
Step 2
Create an IR configuration policy and upload the remote's Linux Infrared Remote Control (LIRC)
config file from the manufacturer
Apply policy to the device group
Cisco Interactive Experience Client 4600 Series User Guide
Non-Cisco Remote Controls
E-13