Cisco 4310 User Manual Table of Contents Configure DMP IP Address and Account Setup Cisco's DMP Admin Setup DMP Settings Setup Internal Storage - Read & Write Adding your device into CommandCenterHD...
Plug DMP into the power source Turn on the Display/TV 5. Turn on the DMP & you should see a Cisco Welcome Screen for only 30 Seconds (if missed, restart DMP) 6. Take note of the DMP IP Address (write it down, take a picture, utilize your superior memory bank, etc.).
Setup DMP Settings Select Flash 2. Update Splash Screen Display Time to 10000 Set Max Screen Width and Height Click Apply 5. Click Save Configuration and Restart DMP 720p = 1366 pixels (width) x 768 pixels (height) 1080p = 1920 pixels (width) x 1080 pixels (height) Setup Internal Storage - Read and Write Click on Internal Storage 2.
13. Select Orientation based on the settings you defines during the DMP setup ie Horizontal displays have a browser rotation of 0, vertical display have a browser rotation of 270. Option is not supported on the 4310. 14. Select Type to Live 15.