Selecting The Master Video Display - Cisco Interactive Experience Client 4600 Series User Manual

Display Settings
Figure 7-16
Step 5 Click Apply.
Step 6 To exit the Display window, click Close.

Selecting the Master Video Display

The Master setting indicates the input method that is used to connect the video display to the IEC 4600
Series if more than one display has been connected. The two choices are VGA and HDMI. Choose the
display connection that you want as the master video display by following these steps.
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the Display icon.
Step 2
Cisco Interactive Experience Client 4600 Series User Guide
7-12
Rotation Drop-Down List
Chapter 7 Locally Configuring the IEC