Monitors; Remote Controls; Wireless Keyboard And Mouse Combination; Wired Mouse - Cisco Interactive Experience Client 4600 Series User Manual

Appendix A Compatible Peripherals
Select the ProDrive radio button in the Protocol field.
Step 5
Configure the following values in the Communication field:
Step 6
a.
b.
c.
Select the Operating System as Linux from the Touch Type field drop down menu.
Step 7
Select Back and then select Yes to save settings.
Step 8

Monitors

Any monitor with a VGA or HDMI connector will work with 2.3. It is recommended that you use a 1920
x 1080 resolution.

Remote Controls

The Cisco remote control that is supported for 2.3 is Cisco Remote Control IEP-IR-K9.
Other remote controls can also be used. See the "Non-Cisco Remote Controls" section in Appendix E
for instructions on how to configure remote controls.

Wireless Keyboard and Mouse Combination

A wireless keyboard cannot be used during the installation of the IEC.
Note
A wireless keyboard and mouse combination must be USB.
The following wireless keyboard and mouse combinations have been tested with 2.3 and are supported:
•
•

Wired Mouse

A wired mouse must be USB.
The following have been tested with 2.3 and are supported:
•
•
•
Configure the Touch Type as Single Touch.
Configure the Communications as Mouse.
Configure the Identification as Manual.
Logitech USB wireless MK320
Logitech USB wireless combo MK52
Inland Optical USB Mouse
Logitech Optical USB Mouse
Targus AMU81USZ
Cisco Interactive Experience Client 4600 Series User Guide
Compatible Peripherals
A-7