Cisco Interactive Experience Client 4600 Series User Manual page 106

Off-Line Caching
Log into the IEM.
Step 1
If you want to configure property settings just for one IEC, go to the IEC's profile. Otherwise, create a
Step 2
new policy or access an existing policy that is applied to the IECs that you want to enable aggressive
caching.
In the profile or policy, find the browser property and expand it to show the cache property within it.
Step 3
Expand the cache property to show the media and web properties within it.
Step 4
Expand the media property to show the enabled and mode properties within it.
Step 5
Figure 4-1
Step 6 Set the enabled property to true to enable media caching.
Set the mode property to Content never expires.
Step 7
(Optional) Set the cache size for media.
Step 8
Expand the web property to show the enabled and mode properties within it.
Step 9
Figure 4-2
Step 10 Set the enabled property to true to enable web caching.
Step 11 (Optional) Set the web cache size.
Click Apply.
Step 12
If you created a new policy for aggressive caching, apply it to the devices.
Step 13
Cisco Interactive Experience Client 4600 Series User Guide
4-2
Media Property
Web Property Expanded
Chapter 4 Off-Line Caching