Cisco Interactive Experience Client 4600 Series User Manual page 129

Chapter 7 Locally Configuring the IEC
Figure 7-2
Step 4 Enter the device name in the Device name field.
Step 5 Enter the device description in the Device Description field.
Enter the device location in the Device Location field.
Step 6
Click the Switch to standalone button.
Step 7
Enter the account name in the Account field.
Step 8
Enter the user name in the User name field.
Step 9
Enter the password in the Password field. To verify that you entered the correct password, check the
Step 10
Show password check box to see the characters entered.
Click Unregister.
Step 11
To exit the System window, click Close.
Step 12
In the System Settings window, click Reboot.
Step 13
Server Tab
Cisco Interactive Experience Client 4600 Series User Guide
Setting Stand-Alone Mode
7-3