Cisco Interactive Experience Client 4600 Series User Manual page 221

Appendix F Video Conferencing Using the Session Initiation Protocol Client
Figure F-16
Enter the directory number in the Directory Number field. The directory number must be a number that
Step 27
does not already exist in the CUCM.
Figure F-17
Enter a description in the Description field. It is good practice to enter the directory number in this field.
Step 28
Enter a value in the Alerting Name field. It is good practice to enter the directory number in this field too.
Step 29
Enter a description in the ASCII Alerting Name field. It is good practice to enter the directory number
Step 30
in this field too.
Click Save.
Step 31
Now that a directory number has been specified, the IP phone must be configured to pick this number
and store it. To do so, it has to be linked to the CUCM server.
Go to the IP phone.
Step 32
Press the System Settings button.
Step 33
Association Information Area
Directory Number Information Area
Cisco Interactive Experience Client 4600 Series User Guide
Cisco IP Phone Set Up on the CUCM
F-23