Cisco Interactive Experience Client 4600 Series User Manual page 220

Cisco IP Phone Set Up on the CUCM
Figure F-14
From the Video Capabilities drop-down menu, choose Enabled.
Step 21
From the Web Access drop-down menu, choose Enabled.
Step 22
Click Save.
Step 23
Figure F-15
A dialog box appears.
Step 24 Click Apply Config.
Note
Step 25 Click OK.
Step 26 Click Line [1] – Add a new DN within the Association Information area.
Cisco Interactive Experience Client 4600 Series User Guide
F-22
Product Specific Configuration Layout Area
Save Button
It is important that you first save configurations before applying them. Otherwise, the
configurations will be lost.
Appendix F Video Conferencing Using the Session Initiation Protocol Client