Specifying The Audio Output Device - Cisco Interactive Experience Client 4600 Series User Manual

Audio Settings
To exit the Audio window, click Close.
Step 6

Specifying the Audio Output Device

The default setting for audio output is Analog. The other options are HDMI, USB headset, and USB
speaker.
The audio mode falls back to 'Analog' when the audio output is configured as 'USB headset' or 'USB
Note
speaker' but a USB headset or speaker is not connected to the IEC.
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the Audio icon.
Step 2
Figure 7-7
Connect the cable from the output device to a port (HDMI, USB, TRS headphone, or IR) on the Cisco
Step 3
IEC 4600 Series.
Cisco Interactive Experience Client 4600 Series User Guide
7-6
Audio Icon in the System Settings window
Chapter 7 Locally Configuring the IEC