Configuring The System - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 2 Setting Up the IEC
•
•
A license for the device must exist in the IEM before the device can be registered. If a license does not
exist in the IEM to cover the device, the device will not register and it cannot be managed by the IEM
until a license is obtained for it. For more information about licensing, refer to the Cisco Interactive
Experience Manager Administrator Guide.
You will register the IEC using the New Device button within the Devices' Edit menu. Refer to the
"Adding a New Device" section of the Cisco Interactive Experience Manager Administrator Guide for
instructions on how to add the device.

Configuring the System

To configure the system, you will need the Cisco IEM URL. If you do not know the URL, contact the
administrator in your company who installed and configured the Cisco IEM.
Step 1 Press Ctrl-Alt-S. The combination of these three keys opens the System Settings window.
Figure 2-4
In Chapter 7, you will learn how to configure each of the settings. For now you will learn how to
configure the system settings to get started.
Step 2 Click the System icon.
Tip
Now you will configure the system to connect the Cisco IEC 4600 Series to the Cisco IEM. By default,
Step 3
the Server tab is displayed. If the Server tab is not displayed, click the Server tab.
The IEC's serial number, which can be found on the bottom of the device
User credentials on the IEM
System Settings Window
You can use either the mouse or arrow keys on a keyboard to navigate the icons within the
System Settings window.
Cisco Interactive Experience Client 4600 Series User Guide
Configuring the System
2-17