Cisco Interactive Experience Client 4600 Series User Manual page 36

Connecting to the Network
If the network connection is changed, the Cisco IEC 4600 Series device's IP address will change. Record
the new IP address.
Step 8 If the DHCP check box is checked, uncheck the Use DHCP check box.
Figure 2-14
Click Apply.
Step 9
Enter the IP address in the IP Address field.
Step 10
Enter the subnet mask in the Subnet Mask field.
Step 11
Enter the gateway address in the Gateway field.
Step 12
Step 13 Enter the primary DNS server's IP address in the Primary DNS server IP Address field.
Step 14 If there is a second DNS server, enter the secondary DNS server's IP address in the Secondary DNS
server IP Address field.
When you complete the selections in this window, click Apply.
Step 15
Step 16 To exit the Network window, click Close.
Step 17 In the System Settings window, click Reboot.
Cisco Interactive Experience Client 4600 Series User Guide
2-24
Reboot Icon in System Settings Window
Chapter 2 Setting Up the IEC