Display Settings; Adjusting The Rotation - Cisco Interactive Experience Client 4600 Series User Manual

Chapter 7 Locally Configuring the IEC

Display Settings

There are two tabs in the Display settings window. The Information tab lists the display resolution, size,
and depth. The General tab indicates the rotation of the display and type of master input used to connect
the Cisco IEC 4600 Series to the video display.

Adjusting the Rotation

The rotation is determined by the IEM policy that is applied. The rotation is set to Normal by default.
To change the rotation in standalone mode, follow these steps:
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the Display icon.
Step 2
Figure 7-15
.Click the General tab.
Step 3
From the Rotation drop-down list, choose a setting (Normal, Clockwise, Counter Clockwise, or Upside
Step 4
Down) that will display the startup URL right-side up.
Display Icon in the System Settings window
Cisco Interactive Experience Client 4600 Series User Guide
Display Settings
7-11