Configuring A Wireless Connection Using A Static Ip Address - Cisco Interactive Experience Client 4600 Series User Manual

Network Settings
Figure 3-15
If you change the network connection, the Cisco IEC 4600 Series device's IP address will change. Be
sure to record the new IP address.

Configuring a Wireless Connection using a Static IP Address

If you want to configure a wireless connection to your network using a static IP address, follow these
steps:
Press Ctrl-Alt-S to display the System Settings window.
Step 1
Click the Network icon.
Step 2
Cisco Interactive Experience Client 4600 Series User Guide
3-14
Reboot Icon in the System Settings Window
Chapter 3 Configuring Settings