1.
Component Names and LED Names
Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Regions)
Power Distribution Units (for Regions other than the EMEIA, Cen-
tral American, and Caribbean Regions)
There are two sizes for power distribution units: 1U and 2U.
Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
For power distribution units (AC200-240V, 1U, 4 Outlets), there are two different types of exteriors.
Figure 24 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
1.
Main line switch
This turns on and off the power distribution unit.
2.
Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
3.
Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC input
cable).
Figure 25 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
1.
Main line switch
This turns on and off the power distribution unit.
2.
Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
3.
Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC input
cable).
1
3
3
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
2
1
2
27
P3AG-1842-06ENZ0