Ethernet (Error Codes That Occur On Communication) - Mitsubishi Electric IQSS-R-E Reference Manual

Ethernet (Error codes that occur on communication)

The following table shows the error codes displayed in the "Ethernet Configuration" window of an engineering tool.
Error code is displayed when the communication error or iQ Sensor Solution related error occurred. (Page 347 iQ Sensor
Solution-related errors)
Mitsubishi Electric Corporation
Error code Error and cause
C055H to System error
C056H
C059H The function which is not supported by the device
supporting iQSS was performed.
C05CH • The setting value of the communication setting is out of
the range.
• The items of communication setting which cannot be set
on the target device supporting iQSS were set.
• The required setting items have not been set to the target
device supporting iQSS.
C061H System error
CEE0H The devices supporting iQSS, which were detected by the
other peripheral device or other iQ Sensor Solution function
was performed while the automatic detection function of
connected devices is processing.
Corrective action
• Check the considerations for the performed function.
• Check the operating status and connection status of the devices
supporting iQSS.
• Check the connection of Ethernet cable and a hub.
• Check the Ethernet line status.
• Reset the CPU module and the devices supporting iQSS and retry.
If the problem persists, contact the manufacturer of the devices supporting
iQSS.
Check if the function is supported by the connected device supporting iQSS.
Review the settings and retry.
• Check the considerations for the performed function.
• Check the operating status and connection status of the devices
supporting iQSS.
• Check the connection of Ethernet cable and a hub.
• Check the Ethernet line status.
• Reset the CPU module and the devices supporting iQSS and retry.
If the problem persists, contact the manufacturer of the devices supporting
iQSS.
After the automatic detection function of connected devices is completed,
perform the other function.
The error codes in the
following table indicate the
lower 4 digits of 2C09****.
APPX
Appendix 5 Error Code List
A
351