Reading/Writing Parameters From/To Devices Supporting Iqss - Mitsubishi Electric IQSS-R-E Reference Manual

4.3
Reading/Writing Parameters from/to Devices
Supporting iQSS
Parameters can be read from and written to a slave station.
For the operation methods of the "CC-Link Configuration" window, refer to the following manual.
 GX Works2 Version 1 Operating Manual (Common)
Window
1. Select
• When using a CC-Link master/local module (QJ61BT11N), the parameters of inverters (FR-A720 series and
FR-A740 series) can be read/written.
• The data backup/restoration function is useful to read/write the parameters of multiple devices supporting
iQSS in a batch. (Page 68 Backing up/Restoring Data of Devices Supporting iQSS)
• The useful functions (linkage with dedicated tools, and command execution to slave stations) can also be
used in the "CC-Link Configuration" window. (Page 323 Useful Functions)
■Display methods of the "Parameter Processing of Slave Station" screen
The "Parameter Processing of Slave Station" screen can also be displayed by any of the following operations.
• Select a target module in 'List of stations' or 'Device map area' in the "CC-Link Configuration" window, then right-click and
select [Online]  [Parameter Processing of Slave Station] from the shortcut menu.
• Select a target module in 'List of stations' or 'Device map area' on the "Sensor/Device Monitor for CC-Link" screen, and
select [Online]  [Parameter Processing of Slave Station].
• Select a target module in 'List of stations' or 'Device map area' on the "Sensor/Device Monitor for CC-Link" screen, then
right-click and select [Parameter Processing of Slave Station] from the shortcut menu.
For details on the "Sensor/Device Monitor for CC-Link" screen, refer to the following section.
Page 66 Monitoring Devices Supporting iQSS
■Display method of a device supporting iQSS, which is connected to a bridge module
(NZ2AW1C2AL) on the "Parameter Processing of Slave Module" screen
A device supporting iQSS, which is connected to a bridge module (NZ2AW1C2AL), can be displayed on the "Parameter
Processing of Slave Module" screen by the following operation.
Operating procedure
1.
Select a bridge module (NZ2AW1C2AL) in 'List of stations' or 'Device map area' in the "CC-Link Configuration" window.
2.
Select [CC-Link Configuration]  [Open System Configuration]  [Open AnyWireASLINK Configuration].
3.
Select a target device supporting iQSS in 'List of modules' or 'Device map area' in the "AnyWireASLINK Configuration"
window, and select [AnyWireASLINK Configuration]  [Online]  [Parameter Processing of Slave Module].
4 CC-Link
64

4.3 Reading/Writing Parameters from/to Devices Supporting iQSS

2. Select
1.
Select a target device supporting iQSS in 'List of stations' or
'Device map area' in the "CC-Link Configuration" window,
and select [CC-Link Configuration]  [Online]  [Parameter
Processing of Slave Station].
2.
Read/write the parameters on the "Parameter Processing of
Slave Station" screen.