Detecting Devices Supporting Iqss Automatically - Mitsubishi Electric IQSS-R-E Reference Manual

Iq sensor solution, melsec iq-r/iq-f/l/q series, got2000, melipc
Table of Contents

Advertisement

8.1

Detecting Devices Supporting iQSS Automatically

A slave station connected to a CC-Link master/local module can be detected and the information can be displayed in the "CC-
Link Configuration" window.
For the creation method of a new project and the operation methods of the "CC-Link Configuration" window, refer to the
following manual.
GX Works3 Operating Manual
Operating procedure
8 CC-Link
198
8.1 Detecting Devices Supporting iQSS Automatically
Create a new project for CC-Link in an engineering tool.
1.
Select "Parameter"  "Module Information" in the
"Navigation" window, then right-click and select [Add New
Module] from the shortcut menu.
2.
Select the following items from "Module Selection" on the
"Add New Module" screen.
• "Module Type": Network Module
• "Module Name": RJ61BT11
• "Station Type": Master Station
3.
Double-click "Parameter"  "Module Information"  "(new
module)"  "Module Parameter" in the "Navigation" window,
then double-click "Basic Settings"  "Network Configuration
Settings"  "Detailed Setting".

Advertisement

Table of Contents
loading

This manual is also suitable for:

13jv28

Table of Contents