Operating procedure
1. Select
3. Click
1. Select
2. Click
4 CC-Link
60
4.1 Detecting Devices Supporting iQSS Automatically
2. Check
2. Select
Select
1. Check
1.
Detect and display a bridge module (NZ2AW1C2AL) in the
"CC-Link Configuration" window.
For the method for detecting and displaying a bridge module
(NZ2AW1C2AL) automatically in the "CC-Link Configuration"
window, refer to the following section.
Page 61 Detection method of a system configuration
2.
Select a bridge module (NZ2AW1C2AL) in 'List of stations' or
'Device map area' in the "CC-Link Configuration" window, and
select [CC-Link Configuration] [Open System
Configuration] [Open AnyWireASLINK Configuration].
3.
Select [AnyWireASLINK Configuration] [Online] [Detect
Now] in the "AnyWireASLINK Configuration" window.
4.
When an automatic address detection is required, select the
"Execute Detect Now after Address Auto-recognition"
checkbox, then click the [Yes] button.
For a case in which an automatic address detection is required,
refer to the following manual.
CC-Link-AnyWireASLINK Bridge Module User's Manual