Table of Contents
Advertisement
Data restoration
Information saved in an SD memory card can be restored to a device supporting iQSS for each ID by using an engineering
tool.
Operating procedure
The initial value of the restoration setting (SD1367) is as follows:
• Lower 8 bits of SD1367 (operation setting on error): 0H (continue)
Use a program when restoring data with the settings other than above. (Page 186 Program execution for
data restoration)
1.
Select a target device supporting iQSS in the
"AnyWireASLINK Configuration" window, and select
[AnyWireASLINK Configuration] [Online] [Restore Slave
Module].
2.
Select backup data to be restored, and click the [Execute]
button.
A list of the backup folder names (date_number) is
displayed in the column of "Folder Name".
Backup data is stored in backup folders for each
folder name (Start I/O number_ID) in an SD
memory card.
For details on the backup folder configuration,
refer to the following section.
Page 172 Backup folder configuration
3.
Read the message, and click the [OK] button.
Data is restored.
7.4 Backing up/Restoring Data of Devices Supporting iQSS
7 AnyWireASLINK
185
7
Advertisement
Table of Contents
