Mitsubishi Electric IQSS-R-E Reference Manual page 317

Option setting
The "Option Setting" screen will appear by selecting [Tool]  [Options] in the "CC IE Field Configuration" window.
In the option setting, parameter information can be saved in a project.
Parameter information is saved in a project by selecting the checkbox.
Conditions under which saved parameter information is cleared
Saved parameter information will be deleted under the following condition.
Read the parameters of a slave station by selecting [Parameter Processing of Slave Station]/[The Parameter Processing of
Same Slave Station] from the shortcut menu.
Item
"CC IE Field Configuration" window
"Parameter Processing of Slave
Station" screen
Operation
Open the "CC IE Field Configuration" window.
Close with the setting applied.
Perform an automatic detection of connected devices.
Change the function version, and close the property
screen.
Unselect the checkbox in the option setting.
Open the "Parameter Processing of Slave Station"
screen.
Close the "Parameter Processing of Slave Station"
screen.
11.2 Reading/Writing Parameters from/to Devices Supporting iQSS
Description
Parameter information will be skipped and not read when the
module with the station number that match with the saved
parameter information is not placed in the "CC IE Field
Configuration" window.
In addition, parameter information which was skipped and
not read will be deleted from the storage file.
Parameter information will be deleted from the storage file
when the target module is not included in the system
configuration.
All parameter information will be deleted once.
Parameter information will be deleted from the storage file
by closing the property screen after changing the function
version.
Parameter information will be deleted from the storage file
by saving the setting after unselecting the checkbox.
Parameter information that does not match with the target
module will be skipped and not read.
In addition, parameter information which was skipped and
not read will be deleted from the storage file.
Parameter information will be deleted from the storage file
by closing the "Parameter Processing of Slave Station"
screen under the following condition.
• Blank all values entered in the column of "Read Value"/
"Write Value".
• Unselect all checkboxes.
11 CC-Link IE Field Network
11
315