Mitsubishi Electric IQSS-R-E Reference Manual page 209

Backup folder/file
Backup data is created in the 'CC-Link' folder which exists in the 'Backup' folder under the main folder of '$MELPRJ$' in the
root directory when data is backed up.
If no '$MELPRJ$' folder, 'Backup' folder, or 'CC-Link' folder exists, each of the folders are created as well when data is backed
up.
Up to 100 backup folders (date_number) can be created in the 'CC-Link' folder.
■Backup folder configuration
The following figure shows the backup folder configuration in an SD memory card.
/
$MELPRJ$ Backup
(1) A folder to save the settings of devices supporting iQSS connected to CC-Link
(2) Backup folder (date_number)
(3) Backup folder (start I/O number_station number)
(4) Backup data (information of each station)
(5) Backup data (information of each station sub-ID number)
When backing up the data of a device supporting iQSS, which is connected to a bridge module
(NZ2AW1C2AL):
• Backup data is stored in the 'CC-Link' backup folder.
• The station sub-ID number is the same ID number as the AnyWireASLINK address ID.
• The backup file (STATION0000.QBR) of the bridge module is not created.
(1) (2)
CC-Link 20160101_00
20160101_01
20160102_02
AnyWireASLINK
8.4 Backing up/Restoring Data of Devices Supporting iQSS
(3)
STATION0001.QBR
0001_0001
$BKUP_UNIT_INF.BSI
STATION0001.QBR
0001_0001
$BKUP_UNIT_INF.BSI
SUBID0001.QBR
0001_0064
SUBID0002.QBR
SUBID0033.QBR
$BKUP_UNIT_INF.BSI
(4)
(5)
8
8 CC-Link
207