Mitsubishi Electric IQSS-R-E Reference Manual page 59

Select
1. Check
2. Click
Select
7.
Select [CC-Link Configuration]  [Online]  [Detect Now] in
the "CC-Link Configuration" window.
8.
Read the message and select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox, then click the [Yes] button.
In any of the following cases, select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox.
• The automatic detection function of connected devices is used
for the first time.
• The CPU module was reset or turned OFF.
• The actual system configuration was changed.
The actual system configuration is displayed in the "CC-Link
Configuration" window.
List of stations
Device map area
Output window
9.
Select [CC-Link Configuration]  [Close with Reflecting the
Setting] in the "CC-Link Configuration" window.
The setting in the "CC-Link Configuration" window is applied to the
network parameter and completed.
4.1 Detecting Devices Supporting iQSS Automatically
4
4 CC-Link
57