Data restoration
Information saved in an SD memory card can be restored to a device supporting iQSS for each station by using an
engineering tool.
Operating procedure
The initial value of the restoration setting (SD1367) is as follows:
• Lower 8 bits of SD1367 (operation setting on error): 0H (continue)
Use a program when restoring data with the settings other than above. (Page 269 Program execution for
data restoration)
9 CC-Link IE Field Network
268
9.4 Backing up/Restoring Data of Devices Supporting iQSS
1.
Select a target device supporting iQSS in the "CC IE Field
Configuration" window, and select [CC IE Field Configuration]
[Online] [Restore Slave Station].
2.
Select backup data to be restored, and click the [Execute]
button.
A list of the backup folder names (date_number) is
displayed in the column of "Folder Name".
Backup data is stored in backup folders for each
folder name (Start I/O number_Station number) in
an SD memory card.
For details on the backup folder configuration,
refer to the following section.
Page 254 Backup folder configuration
3.
Read the message, and click the [OK] button.
Data is restored.