■Verification method of a device supporting iQSS which is connected to a bridge module
(NZ2AW1C2AL)
The system configuration of a device supporting iQSS, which is connected to a bridge module (NZ2AW1C2AL), can also be
verified by the following operation.
Operating procedure
1.
Select a bridge module (NZ2AW1C2AL) in 'List of stations' or 'Device map area' in the "CC-Link Configuration" window.
2.
Select [CC-Link Configuration] [Open System Configuration] [Open AnyWireASLINK Configuration].
3.
Select [AnyWireASLINK Configuration] [Online] [Verification of the Configuration with the Connected Module] in the
"AnyWireASLINK Configuration" window.
4.2 Verifying Devices Supporting iQSS Against System Configuration
4
4 CC-Link
63