Mitsubishi Electric IQSS-R-E Reference Manual page 157

[Initialization]
(0) Initialize the execution result.
Initialize the normal completion display.
Initialize the abnormal completion display.
Set the backup execution trigger.
[Executing data backup]
(8) Set the backup right-to-use request trigger.
[Requesting backup right to use]
(11) Store the right-to-use number.
Set the backup right-to-use request trigger.
Set the backup right-to-use confirmation trigger.
[Checking backup right to use]
(20) Set the backup setting/start trigger.
Display the right-to-use acquisition failure.
[Setting/Starting data backup]
(34) Set the target module/execution unit.
Set the target folder number.
Set the target module.
Set the operation setting when a data backup error occurs.
Set the backup request.
[Checking data backup execution]
(44) Display the normal completion.
Save the number of normally completed devices.
(50) Display the abnormal completion.
Save the number of devices completed with an error.
Save the error code (module error).
Save the error code (device error).
[Enabling the next data backup process]
(60) Enable the data backup execution.
Clear the initialization trigger.
Clear the backup execution trigger.
Clear the backup right-to-use request trigger.
Clear the backup right-to-use confirmation trigger.
Clear the backup setting/start trigger.
[Setting for cancelling the process]
(68) Set the backup cancellation request.
6.5 Backing up/Restoring Data of Devices Supporting iQSS
6
6 Ethernet
155