Table of Contents
Advertisement
Data restoration
Information saved in an SD memory card can be restored to a device supporting iQSS for each IP address by using an
engineering tool.
Operating procedure
The initial value of the restoration setting (SD1367) is as follows:
• Lower 8 bits of SD1367 (operation setting on error): 0H (continue)
Use a program when restoring data with the settings other than above. (Page 300 Program execution for
data restoration)
1.
Select a target device supporting iQSS in the "Ethernet
Configuration" window, and select [Ethernet Configuration]
[Online] [Backup Ethernet Device].
2.
Read the message and click the [Yes] button.
3.
Select backup data to be restored, and click the [Execute]
button.
Data is restored.
A list of the backup folder names (date_number) is
displayed in the column of "Folder Name".
Backup data is stored in backup folders for each
folder name (Start I/O number_Station number) in
an SD memory card.
For details on the backup folder configuration,
refer to the following section.
Page 287 Backup folder configuration
10.5 Backing up/Restoring Data of Devices Supporting iQSS
10
10 Ethernet
299
Advertisement
Table of Contents
