Detecting Devices Supporting Iqss Automatically - Mitsubishi Electric IQSS-R-E Reference Manual

5.1

Detecting Devices Supporting iQSS Automatically

A slave station connected to a CC-Link IE Field Network master/local module can be detected and the information can be
displayed in the "CC IE Field Configuration" window.
For the creation method of a new project and the operation methods of the "CC IE Field Configuration" window, refer to the
following manual.
 GX Works2 Version 1 Operating Manual (Common)
Operating procedure
Select
3. Check
1. Select
2. Enter
Click
1.
Create a new project in an engineering tool.
2.
Select "Parameter"  "Network Parameter"  "Ethernet/CC
IE Field" on the Project view.
3.
Select and enter necessary parameters on the "Network
Parameter - MELSECNET/CC IE/Ethernet Module
Configuration" screen.
4.
Select "Set the network configuration setting in the CC IE
Field configuration window".
5.
Read the message and click the [Yes] button.
The [Network Configuration Settings] button is changed to the [CC
IE Field Configuration Setting] button.
6.
Click the [CC IE Field Configuration Setting] button.
5.1 Detecting Devices Supporting iQSS Automatically
5 CC-Link IE Field Network
5
99