Table of Contents
Advertisement
Data restoration
Information saved in an SD memory card can be restored to a device supporting iQSS for each IP address by using an
engineering tool.
Operating procedure
1. Select
2. Click
The initial value of the restoration setting (SD1444) is as follows:
• Lower 8 bits of SD1444 (operation setting on error): 0H (continue)
Use a program when restoring data with the settings other than above. (Page 157 Program execution for
data restoration)
6 Ethernet
156
6.5 Backing up/Restoring Data of Devices Supporting iQSS
2. Select
1. Select
1.
Select a target device supporting iQSS in 'List of devices' or
'Device map area' in the "Ethernet Configuration" window,
and select [Ethernet Configuration] [Online] [Restore
Ethernet Device].
2.
Select backup data to be restored, and click the [Execute]
button.
A list of the backup folder names (date_number) is
displayed in the column of "Folder Name".
Backup data is stored in backup folders for each
folder name (Target module_IP address) in an SD
memory card.
For details on the backup folder configuration,
refer to the following section.
Page 145 Backup folder configuration
3.
Read the message, and click the [OK] button.
Data is restored.
Advertisement
Table of Contents
