Table of Contents
Advertisement
12
Ethernet
This chapter explains the operation methods when using iQ Sensor Solution functions for a MELIPC via Ethernet.
System configuration
This section explains the iQ Sensor Solution functions for Ethernet using the following system configuration.
(1)
Type
(1)
Engineering tool
(2)
Module
(3)
Device supporting iQSS
(4)
For details on the devices supporting iQSS and the iQ Sensor Solution functions available for Ethernet, refer to the following
section.
Page 325 Devices that Support iQ Sensor Solution
For information on the engineering tools available for iQ Sensor Solution and the versions of engineering tools supporting
each iQ Sensor Solution function, refer to the following section.
Page 337 Engineering Tool and Version List
• Before using each iQ Sensor Solution function, complete the installation and wiring of the actual system
configuration, and set parameters and other settings required for communication with a device supporting
iQSS.
• A device supporting iQSS, which is connected to the tip of a router, does not support.
For details on the settings, refer to the following manuals.
MELIPC MI5000 Series User's Manual (Startup)
MELIPC MI5000 Series User's Manual (Application)
Precautions
An error is returned to the request source when an iQ Sensor Solution function via Ethernet and that via a built-in Ethernet
port are performed at the same time.
The following iQ Sensor Solution functions via a built-in Ethernet port cannot be performed at the same time.
• Automatic detection of connected devices
• Reflection of the communication setting
• Sensor parameter read/write function
(2)
Model name
MI Configurator
SW1DNN-MICONF-M
MELIPC
MI5122-VW
Laser displacement sensor
HL-C2
COGNEX Vision System
In-Sight EZ-700
(3)
(4)
12
Manufacturer
Mitsubishi Electric
Corporation
Panasonic Industrial
Devices SUNX Co., Ltd.
Cognex Corporation
12 Ethernet
317
Advertisement
Table of Contents
