Mitsubishi Electric IQSS-R-E Reference Manual page 111

Backup folder/file
Backup data is created in the 'iQSS' folder in the root directory when backing up the data.
If no 'iQSS' folder exists when backing up the data, an 'iQSS' folder will be newly created.
Up to 100 backup folders (date_number) can be created in the 'CC IE Field' folder.
Do not change a backup folder name, configuration or saved file. Otherwise, data may not be restored properly.
For the backup file capacity, refer to the following section.
Page 368 Backup File Capacity
■Backup folder configuration
The following figure shows the backup folder configuration in an SD memory card.
Root directory
/ iQSS
1) Backup folder
(Date_Number)
Maximum of 100
CC IE Field 20141211_01
_ _
20141211_02
2) Backup folder
(I/O number_Station
number)
(Station sub-ID number)
0003_ 0001
4) SUBID0513.QBR
4) SUBID0517.QBR
(Station number)
0003_ 0001
3) STATION0001.QBR
(Station sub-ID number)
0003_ 0064
4) SUBID0513.QBR
4) SUBID0517.QBR
5.5 Backing up/Restoring Data of Devices Supporting iQSS
Backup data
(Backup file)
(Backup file)
SSBRINF.QSI
(System file)
Backup data
(Backup file)
SSBRINF.QSI
(System file)
Backup data
(Backup file)
(Backup file)
SSBRINF.QSI
(System file)
5 CC-Link IE Field Network
5
109