Mitsubishi Electric IQSS-R-E Reference Manual page 147

Backup folder/file
Backup data is created in the 'iQSS' folder in the root directory when backing up the data.
If no 'iQSS' folder exists when backing up the data, an 'iQSS' folder will be newly created.
Up to 100 backup folders (date_number) can be created in the 'Ethernet' folder.
Do not change a backup folder name, configuration or saved file. Otherwise, data may not be restored properly.
For the backup file capacity, refer to the following section.
Page 368 Backup File Capacity
■Backup folder configuration
The following figure shows the backup folder configuration in an SD memory card.
Root directory
/ iQSS
■Backup folder name
1) Date_Number
2014 12 12 01
Arbitrary number (2-digit (00 to 99) decimal)
Backup date (2-digit decimal)
Backup month (2-digit decimal)
Backup year (4-digit decimal)
2) Target module_IP address
03FF 0A615F28
IP address (8-digits hexadecimal)
Target module (4-digits hexadecimal)
03FF: Built-in Ethernet
1) Backup folder
(Date_Number)
Maximum of 100
Ethernet 20141212_01
2) Backup folder
(Target module_IP address)
03FF_ 0A615F28
(Maximum of 1 hierarchy)
03FF_ 0A615F32
(Maximum of 1 hierarchy)
6.5 Backing up/Restoring Data of Devices Supporting iQSS
Backup data
XXXXXXXX
(Backup folder) XXXXXXXX
(Backup file)
XXXXXXXX
(Backup file)
SSBRINF.QSI
(System file)
Backup data
XXXXXXXX
(Backup folder) XXXXXXXX
(Backup file)
XXXXXXXX
(Backup file)
SSBRINF.QSI
(System file)
6 Ethernet
6
145