Mitsubishi Electric IQSS-R-E Reference Manual page 165

[Initialization]
(0) Initialize the execution result.
Initialize the normal completion display.
Initialize the abnormal completion display.
Set the restoration execution trigger.
[Executing data restoration]
(8) Set the restoration right-to-use request trigger.
[Requesting restoration right to use]
(11) Store the right-to-use number.
Set the restoration right-to-use request trigger.
Set the restoration right-to-use confirmation trigger.
[Checking restoration right to use]
(20) Set the restoration setting/start trigger.
Display the right-to-use acquisition failure.
[Setting/Starting data restoration]
(34) Set the target module/execution unit.
Set the target folder number.
Set the target module.
Fourth octet for target device IP address
Third octet for target device IP address
Second octet for target device IP address
First octet for target device IP address
Set the target device 1 or 2.
Set the operation setting when a data restoration error occurs.
Set the restoration request.
[Checking data restoration execution]
(56) Display the normal completion.
Save the number of normally completed devices.
(62) Display the abnormal completion.
Save the number of devices completed with an error.
Save the error code (module error).
Save the error code (device error).
[Enabling the next data restoration process]
(72) Enable the data restoration execution.
Clear the initialization trigger.
Clear the restoration execution trigger.
Clear the restoration right-to-use request trigger.
Clear the restoration right-to-use confirmation trigger.
Clear the restoration setting/start trigger.
[Setting for cancelling the process]
(80) Set the restoration cancellation request.
6.5 Backing up/Restoring Data of Devices Supporting iQSS
6
6 Ethernet
163