Mitsubishi Electric IQSS-R-E Reference Manual page 36

Backup folder/file
Backup data is created in the 'iQSS' folder in the root directory when backing up the data.
If no 'iQSS' folder exists when backing up the data, an 'iQSS' folder will be newly created.
Up to 100 backup folders (date_number) can be created in the 'ASLINK' folder.
Do not change a backup folder name, configuration or saved file. Otherwise, data may not be restored properly.
For the backup file capacity, refer to the following section.
Page 368 Backup File Capacity
■Backup folder configuration
The following figure shows the backup folder configuration in an SD memory card.
Root directory
/ iQSS
■Backup folder name
1) Date_Number
2014 12 10 12
2) Start I/O number_I/O type_ID number
0003 IN_ 0513
■Backup file name
IN_ 0513 .QBR
ID
ID number (4-digit decimal)
OUT or IN_ (OUT: output slave module IN_: input/combined slave module)
3 AnyWireASLINK
34
3.5 Backing up/Restoring Data of Devices Supporting iQSS
1) Backup folder
(Date_Number)
Maximum of 100
ASLINK 20141210_12
Arbitrary number (2-digit (00 to 99) decimal)
Backup date (2-digit decimal)
Backup month (2-digit decimal)
Backup year (4-digit decimal)
ID number (4-digit decimal)
OUT or IN_ (OUT: output slave module IN_: input/combined slave module)
AnyWireASLINK master module start I/O number (4-digit hexadecimal) (A value of start I/O number divided by 16)
2) Backup folder
(Start I/O number_I/O
Type_ID Number)
0003_ IN_ _0513
0003_ IN_ _0514
Backup data
ID_IN__0513.QBR
(Backup file)
SSBRINF.QBI
(System file)
Backup data
ID_IN__0514.QBR
(Backup file)
SSBRINF.QBI
(System file)