8.2
Reading/Writing Parameters from/to Devices
Supporting iQSS
Parameters can be read from and written to a slave station.
Window
• The data backup/restoration function is useful to read/write the parameters of multiple devices supporting
iQSS in a batch. (Page 206 Backing up/Restoring Data of Devices Supporting iQSS)
• The useful function (command execution to slave stations) can also be used in the "CC-Link Configuration"
window. (Page 323 Useful Functions)
• When the refresh setting differs from that of an actual module, the parameter processing of a slave station
cannot be performed.
1.
Select a target device supporting iQSS in the "CC-Link
Configuration" window, then right-click and select [Online]
[Parameter Processing of Slave Station] from the shortcut
menu.
2.
Read/write the parameters on the "Parameter Processing of
Slave Station" screen.
8.2 Reading/Writing Parameters from/to Devices Supporting iQSS
8
8 CC-Link
203