Command execution to slave station
Commands can be executed to slave stations connected to CC-Link master/local module or CC-Link IE Field Network master/
local module.
Before executing commands to a slave station, complete the settings so that the communication with a device supporting
iQSS can be established successfully.
• CC-Link(Page 54 Before using iQ Sensor Solution functions)
Operating procedure
APPX
324
Appendix 1 Useful Functions
1. Select
2. Select
1. Select
2. Click
For CC-Link
1.
Select a target device supporting iQSS in 'Device map area'
in the "CC-Link Configuration" window, then right-click and
select [Online] [Command Execution of Slave Station] from
the shortcut menu.
2.
Select a command from "Method selection", and click the
[Execute] button.
The command is executed and the result is displayed on
"Execution Result".
Specify values in "Command Setting" as necessary.
The commands that can be executed differ
depending on the target slave station.