6.1
Detecting Devices Supporting iQSS Automatically
A device supporting iQSS connected to a built-in Ethernet port CPU can be detected and the information can be displayed in
the "Ethernet Configuration" window.
For the creation method of a new project and the operation methods of the "Ethernet Configuration" window, refer to the
following manual.
GX Works2 Version 1 Operating Manual (Common)
Operating procedure
1. Select
Click
2. Select
3. Check
Select
Module List
1.
Create a new project in an engineering tool.
2.
Select "Parameter" "PLC Parameter" on the Project view.
3.
Select the [Built-in Ethernet Port Setting] tab on the "L
Parameter Setting" screen.
4.
Select "Set Open Setting in Ethernet Configuration window".
5.
Read the message and click the [Yes] button.
The [Open Settings] button is changed to [Ethernet Conf.] button.
6.
Click the [Ethernet Conf.] button.
7.
Select [Ethernet Configuration] [Online] [Detect Now] in
the "Ethernet Configuration" window.
8.
Read the message and click the [Yes] button.
6.1 Detecting Devices Supporting iQSS Automatically
6
6 Ethernet
137