Mitsubishi Electric IQSS-R-E Reference Manual page 206

Operating procedure
■"Parameter Processing of Slave Station" screen
8 CC-Link
204
8.2 Reading/Writing Parameters from/to Devices Supporting iQSS
• Reading parameters
1.
Select a target to be read.
2.
Select a parameter.
3.
Click the [Execute] button.
The selected parameter is read and the value is displayed in the
column of "Read Value".
• Writing parameters
1.
Select a target to be written.
2.
Select a parameter.
3.
Enter a value in the column of "Write Value".
4.
Click the [Execute] button.
The value entered in the column of "Write Value" is written to the
device supporting iQSS.