Table of Contents
Advertisement
Data backup
Information of a device supporting iQSS can be saved in an SD memory card for each ID by using an engineering tool.
Operating procedure
The initial values of the backup setting (SD1363 and SD1367) are as follows:
• SD1363 (folder number setting): FFFFH (automatic specification)
• Lower 8 bits of SD1367 (operation setting on error): 0H (continue)
Use a program when backing up data with the settings other than the one above. (Page 176 Program
execution for data backup)
1.
Select a target device supporting iQSS in the
"AnyWireASLINK Configuration" window, and select
[AnyWireASLINK Configuration] [Online] [Backup Slave
Module].
2.
Read the message and click the [Yes] button.
Data is backed up.
7.4 Backing up/Restoring Data of Devices Supporting iQSS
7 AnyWireASLINK
175
7
Advertisement
Table of Contents
