Mitsubishi Electric IQSS-R-E Reference Manual page 239

[Initialization]
(0) Initialize the execution result.
Initialize the normal completion display.
Initialize the abnormal completion display.
Set the restoration execution trigger.
[Executing data restoration/Checking data link status]
Check that the data link status of other stations (SW0080 to SW0083) indicates that a data link is in process before making a data restoration request.
(9) Set the restoration right-to-use request trigger.
[Requesting restoration right to use]
(25) Store the right-to-use number.
Set a right-to-use request.
Set the restoration right-to-use confirmation trigger.
[Checking restoration right to use]
(35) Set the restoration setting/start trigger.
Display the right-to-use acquisition failure.
[Setting/Starting data restoration]
(49) Set the target module/execution unit.
Set the target folder number.
Set the target module.
Set the target device 1.
Set the target device 2.
Set the data restoration operation setting (on error).
Set the restoration request.
[Checking data restoration execution]
(64) Display the normal completion.
Save the number of normally completed devices.
(69) Display the abnormal completion.
Save the number of devices completed with an error.
Save the error cause in a module.
Save the restoration error cause in a device.
[Enabling the next data restoration process]
(78) Clear the initialization trigger.
Clear the restoration execution trigger.
Clear the restoration right-to-use request trigger.
Clear the restoration right-to-use confirmation trigger.
Clear the restoration setting/start trigger.
[Setting for cancelling the process]
(88) Set the restoration cancellation request.
[Releasing restoration right to use]
(93) Set the restoration right-to-use release trigger.
[Updating restoration right to use]
(102) Set the restoration right-to-use request.
8.4 Backing up/Restoring Data of Devices Supporting iQSS
8
8 CC-Link
237