Mitsubishi Electric IQSS-R-E Reference Manual page 359

MELSEC iQ-R series
The following table lists the special relays (SM) used for MELSEC iQ-R series.
Number Name
SM606 SD memory card forced
disable instruction
SM1360 iQ Sensor Solution
backup/restoration
right-to-use request
SM1361 iQ Sensor Solution
backup request
SM1362 iQ Sensor Solution
backup normal
completion
SM1363 iQ Sensor Solution
backup abnormal
completion
SM1364 iQ Sensor Solution
restoration request
SM1365 iQ Sensor Solution
restoration normal
completion
SM1366 iQ Sensor Solution
restoration abnormal
completion
SM1367 iQ Sensor Solution
backup/restoration
cancellation request
Description Details
OFF: Cancel instruction When this relay is turned ON, the instruction that forcibly disables an
ON: Forced disable SD memory card is issued. If any function accesses the SD memory
instruction card, the disabling process does not start until the access is completed.
When this relay is turned OFF, the instruction that forcibly disables an
SD memory card is issued.
OFF to ON: Backup/ This relay requests acquiring/releasing a right to use for iQ Sensor
restoration right to use Solution backup/restoration.
requested At the timing when this relay turns OFF to ON, the relay requests a right
ON to OFF: Backup/ to use with the value specified to SD1360.
restoration right to use This relay turns OFF when a right to use is acquired/released.
acquired/released
OFF to ON: Backup This relay requests iQ Sensor Solution data backup.
requested At the timing when this relay turns OFF to ON, the backup for the set
ON to OFF: Backup device(s) is performed.
complete This relay turns OFF when iQ Sensor Solution data backup is complete.
This relay turns ON to OFF when a right to use is acquired.
OFF: Other than normal This relay turns ON when the iQ Sensor Solution data backup is
completion complete normally.
ON: Backup complete When iQ Sensor Solution data backup is compete with an error,
normally SM1363 turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or backup is
requested.
OFF: Other than error This relay turns ON when iQ Sensor Solution data backup is complete
completion with an error. The error code is stored to SD1376 or SD1377.
ON: Backup completed with When iQ Sensor Solution data backup is compete normally, SM1362
error(s) turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or backup is
requested.
OFF to ON: Restoration This relay requests the iQ Sensor Solution data restoration.
requested At the timing when this relay turns OFF to ON, the restoration for the set
ON to OFF: Restoration device(s) is performed.
complete This relay turns OFF when iQ Sensor Solution data restoration is
complete.
This relay turns ON to OFF when a right to use is acquired.
OFF: Restoration is This relay turns ON when iQ Sensor Solution data restoration is
complete abnormally complete normally.
ON: Restoration complete When iQ Sensor Solution data restoration is complete with an error,
normally SM1366 turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or a
restoration is requested.
OFF: Other than error This relay turns ON when iQ Sensor Solution data restoration is
completion complete with an error. The error code is stored to SD1376 or SD1377.
ON: Restoration completed When iQ Sensor Solution data restoration is complete normally,
with error(s) SM1365 turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or a
restoration is requested.
OFF to ON: Backup/ This relay requests the cancellation of iQ Sensor Solution backup/
restoration restoration.
cancellation requested At the timing when this relay turns OFF to ON, iQ Sensor Solution
ON to OFF: Backup/ backup/restoration is cancelled.
restoration This relay turns OFF when the cancellation of iQ Sensor Solution
cancellation complete backup/restoration is complete.
This relay turns ON to OFF when a right to use is acquired or a backup/
restoration is requested.
Appendix 6 Special Relay (SM)/Special Register (SD) List
Set by
(setting
timing)
U
S (status
change)/U
S (status
change)/U
S (status
change)
S (status
change)
A
S (status
change)/U
S (status
change)
S (status
change)
S (status
change)/U
APPX
357