Detecting Devices Connected To A Bridge Module (Nz2Aw1C2Al) - Mitsubishi Electric IQSS-R-E Reference Manual

Detecting devices connected to a bridge module (NZ2AW1C2AL)

To display devices supporting iQSS, which are connected to a bridge module (NZ2AW1C2AL), on a system configuration
diagram, first a bridge module (NZ2AW1C2AL) needs to be detected in the "CC-Link Configuration" window. Then, perform an
automatic detection of connected devices in the "AnyWireASLINK Configuration" window in order to detect and display
devices supporting iQSS which are connected to a bridge module (NZ2AW1C2AL).
For the considerations when detecting devices supporting iQSS connected to a bridge module (NZ2AW1C2AL), refer to the
following section.
Page 202 Considerations when detecting devices connected to a bridge module
System configuration
(1)
Type
(1) Engineering tool
(2) CPU module
(3) CC-Link master/local module
(4) CC-Link-AnyWireASLINK bridge module
(5) ASLINKAMP (Input)
(6) ASLINKER (Input)
8 CC-Link
200
8.1 Detecting Devices Supporting iQSS Automatically
(3)
(2)
Model name
GX Works3 SWnDND-GXW3 ('n' indicates its version.)
RCPU R08CPU
RJ61BT11
NZ2AW1C2AL
Photoelectric sensor B289SB-01AP-CAM20 (ASLINKAMP master)
B289SB-01AP-CAS (ASLINKAMP slave)
Fiber sensor B289SB-01AF-CAS (ASLINKAMP slave)
B289SB-01AF-CAS (ASLINKAMP slave)
B281SB-02U-CC20
(4)
(5)
(6)
Manufacturer
Mitsubishi Electric Corporation
AnyWire Corporation