Detecting Devices Supporting Iqss Automatically - Mitsubishi Electric IQSS-R-E Reference Manual

7.1

Detecting Devices Supporting iQSS Automatically

A slave module connected to an AnyWireASLINK master module can be detected and the information can be displayed in the
"AnyWireASLINK Configuration" window.
For the creation method of a new project and the operation methods of the "AnyWireASLINK Configuration" window, refer to
the following manual.
GX Works3 Operating Manual
Operating procedure
Create a new project for AnyWireASLINK in an engineering tool.
1.
Select "Parameter"  "Module Information" in the
"Navigation" window, then right-click and select [Add New
Module] from the shortcut menu.
2.
Select the following items from "Module Selection" on the
"Add New Module" screen.
• "Module Type": Network Module
• "Module Name": RJ51AW12AL
3.
Double-click "AnyWireASLINK Configuration" in the
"Navigation" window.
The "AnyWireASLINK Configuration" window appears.
4.
Click the [Detect Now] button.
5.
When an automatic address detection is required, select the
"Execute Detect Now after Address Auto-recognition"
checkbox, then click the [Yes] button.
For a case in which an automatic address detection is required,
refer to the following manual.
MELSEC iQ-R AnyWireASLINK Master Module User's Manual
(Application)
7.1 Detecting Devices Supporting iQSS Automatically
7 AnyWireASLINK
167
7